The EasyCut F model range is a line-up of innovative front mowers with or without tine or roller conditioner and work widths of 2.71 m to 4.04 m. At the same time, the range comprises particularly compact and light-weight front mowers for mountain fields and applications. Top hats are available for some models. These form narrow swaths that the tractor can straddle.
Product video
KRONE EasyCut F – Front-mounted disc mowers
The EasyCut F series includes innovative front mowers with working widths from 2.71 m to 3.60 m, with optional tine or roller conditioner. The EasyCut M front mowers are our lightweight machines designed for operation on steep slopes and for spreading material across the work width. Their hitch points are configured to attach as well to small tractors for special applications.
Special Feature
First foldable cutterbar on the market
This first foldable cutterbar on the market is awarded the DLG Silver Medal at Agritechnica 2019. The KRONE development translates into maximum efficiency, maximum overlaps and maximum road safety. From a fingertip control, the operator activates a hydraulic slewing gearbox and swings the ends in front of the cutterbar without disconnecting the driveline.
Product video
EasyCut F 400 CV Fold
The EasyCut F 400 CV Fold from KRONE is an innovative and practical addition to the mower conditioner sector. Working at a maximum width of 4.04m, EasyCut F 400 CV Fold boosts efficiencies and work rates in comparison with traditional front mowers of a maximum 3.20m width and yet doesn’t exceed the statutory 3m transport width.
Product features
- SmartCut: SmartCut: Streifenlose Mahd mit optimaler Überlappung der Messerlaufbahnen
- Messerschnellverschluss für schnelles Messerhandling
- SafeCut: Einzeln abgesicherte Mähscheiben
- CV Aufbereiter mit V-Stahlzinken
- CR und M-Rolls Aufbereiter mit CR oder Polyurethanwalzen
- EasyCut F 400 Fold mit klappbarem Mähholm als CV oder Schwadschnecken-Variante
- EasyCut F 400 CR: maximale Schlagkraft und perfekte Futteraufbereitung
Mit den EasyCut F-Modellen präsentiert KRONE Frontmähwerke der Extraklasse, die dank ihrer innovativen Konstruktion nicht nur äußerst langlebig und wartungsfreundlich sind, sondern auch besonders flexibel einsetzbar. Ob als Solomaschine oder als Butterfly-Kombination, die EasyCut F Frontmähwerke ermöglichen eine effiziente und zuverlässige Grasernte auf höchstem Niveau.
- 2.71 m - 4.04 m working widths
- Push-type or Pull-type cutterbar
- With or without conditioner
- Compact M models
- Models with powered swath drum
- EasyCut F 400 Fold and F 400 CV Fold with folding cutterbar
The EasyCut F series is a line-up of innovative front mounted mowers with or without tine or roller conditioner and work widths of 2.71 m to 4.04 m. At the same time, the range comprises particularly compact and light-weight front mounted mowers for mountain fields and applications. Powered swath drums are available for some models. These form narrow swaths that the tractor cannot straddle.
The front mowers with conditioner are able to swath the material or spread it across the work width. These models are designed for contractors and professional farmers and make a great combination with three-point-mounted rear mowers or butterfly mowers.
The EasyCut M front mowers are our lightweight machines designed for operation on steep slopes and for spreading material across the work width. Mounted close to the tractor without A-frame and benefitting from a low centre of gravity, the machines give perfect contouring.
These front mowers offer work widths of 2.71 m to 3.16 m and have powered top hats that form narrow swaths so the tractor can straddle them. The focus is on quality forage.
- Fully welded: Robust, sealed and permanently lubricated
- The durable satellite drives have massive spur gears for quiet running and superior efficiency
- No inner shoe for trouble-free cutting
The enclosed and fully welded cutterbar meets the highest quality standards and operates dependably and leak-free over many years of hard work. Massive and oil-immersed spur gears impress by very quiet and reliable running in sustained peak-load operation.
The completely welded cutterbar is maintenance free and won’t leak nor lose shape even in so many years of work. We give it special cleanings throughout the manufacturing process so we can implement permanent lubrication and eliminate the need for oil changes.
Using welding robots and CNC technology, KRONE manufactures its cutterbars to the highest quality standards, ensuring they are fully welded and permanently lubricated. After all, the cutterbar is the heart of every disc mower.
The KRONE developed satellite driveline comprises massive spur gears with up to 66 teeth which transfer the power all the way down to the very last disc. The large-diameter gears rotate at reduced speeds, with a higher number of teeth meshing with the neighbouring gearwheels for even quieter running, ultimate efficiency and maximum longevity. The auxiliary gears drive one disc each and as a result are exposed to only minimum loading.
The cutterbar is driven by the right-angle gearbox just behind the inner top hat – for blockage-free operation on headlands and in awkward patches.
- The wedge-shaped cutterbar guarantees clean cuts
- Heavy-duty spur gears run in widely-spaced double bearings
- Swathing or spreading depending on needs
The wedge-shaped cutterbar offers great flexibility to adjust through a large range of settings and leave a short stubble in meadows and pastures as well as long stubble in long-stemmed field crops. An EasyCut mower delivers a reliable performance and clean cut.
The wedge-shaped cutterbar offers many height setting options. The spur gears run in massive double bearings, allowing the cutterbar to handle extremely high loads.
With discs spinning in the B direction of rotation, EasyCut spreads the crops across the full cutting width. All discs alternately turn in pairs, spreading the material across the working width for faster and more uniform wilting.
Spinning inwards, the discs feed the material to the middle of the machine to avoid tractor wheels running over the cut crops. With discs spinning in the A direction of rotation, EasyCut F 280 and F 320 form one swath.
The spur gears are arranged in a forward position and eccentrically inside the gearbox right under the discs. The small auxiliary spur gears are removed from above, the massive main gears gearbox from the side.
With some discs turning in pairs towards each other and others turning away from each other, it was necessary to redesign the degree of blade overlap to ensure cleanest cuts. For stripeless cuts in light and young crops, we have therefore increased blade overlaps on the discs turning outwards (SmartCut). In addition, the blades turning to the rear are set further apart to encourage a smooth flow of large volumes of crop.
- Quick-change blades allow operators to swap blades in the field quickly
- Modular disc design
- Minimum blade wear: 360° blade action
- Excellent cuts from KRONE SmartCut: Optimum blade overlap
There are many reasons for choosing an EasyCut disc mower. Just think of the quick-change blades, the inexpensive wear parts and the perfect disc arrangement for stripeless cuts.
Worn blade fixing pins and wear parts are not an issue for KRONE Easy-Cut, because the modular design of the discs allows you to replace them individually. If you like, you can opt for bolts instead of pins.
Blades of 112 mm length orbit with a generous overlap, producing the typically clean cuts and feeding the material to the rear in a consistent flow.
The blades are free to spin 360-deg. on their pins. They are hard-wearing and self-cleaning, well protected and will not foul with the blades on the neighbouring discs.
We welded curved stops between the individual skids that protect the cutterbar from damage and also contoured the underside of the stops in such a way that no material can build up here and instead flows smoothly to the rear.
High-cut skids are the solution for those who want 80 mm and longer stubble. Depending on how you bolt the skids to the cutterbar, you can increase the cutting height by 30 mm or 50 mm, which is ideal in forage and whole crop silage.
Made from hardened steel, the extra wide skids reduce the ground pressure and hence offer effective protection of both the cutterbar and the sward. The skids are bolted to the cutterbar so they are easy to replace.
Quick-change blades are a must for many farmers and contractors. These blades are quick and easy to reverse or replace in situ.
- Full driveline protection for added reliability
- Neighbouring discs will not collide
- Wear-free
- Quick-change roll pins for minimum downtime and costs
Colliding discs may cause damage and involve costly repairs. KRONE SafeCut offers a maximum of protection and peace of mind. The award winning system on all EasyCut models offers a unique level of protection and operator comfort. SafeCut is a base specification feature on all EasyCut F models.
If the system is suddenly overloaded, the impact is not directed to the spur gears in the driveline, instead a roll pin in the sprocket drive shaft shears off. The pinion shaft continues spinning, jacking up the disc in question, moving it out of the risk zone and the orbit of the neighbouring discs. As a result, SafeCut prevents damage to the spur gears and the neighbouring discs. The roll pins can be replaced in just a few minutes and cost next to nothing.
Each disc on the mower has its own individual impact protection. When the blade hits an obstacle the shockload is transferred to a roll pin which breaks. As a result, the disc automatically threads 15 mm up on the drive shaft.
There is no load on the roll pins during operation. The bearing is tensioned by a nut and two clamping screws. As a result, the roll pins do not suffer from material fatigue and even after many hours of operation they will break only at their inbuilt load level.
Orbiting within the sphere of the mower bed and never protruding beyond the skids, the EasyCut discs benefit from two-fold protection. Additional protection comes from the standard SafeCut system.
- Close attachment to the tractor and compact on the road
- Adjustable ground pressure
- Perfect contouring, three-dimensional pivoting
- SmartCut and SafeCut cutterbars
Attaching to the link arms without A-frame, the EasyCut PUSH models are light-weight and compact and have stretched curtains. All EasyCut cutterbars are permanently lubricated and feature SmartCut and SafeCut.
Elongated holes for the two coupling pins allow the machine to pivot laterally and follow every contour even in the most difficult terrain, providing best protection to the hardware and the sward.
The flexible and telescoping top link (option) allows the mower to follow any contour and produce a perfect cut.
Adjustable springs optimize the ground pressure for best contouring and sward protection.
Although offering a 3.16 m cutting width, the EasyCut F 320 M and F 320 fold into a very compact transport unit. The ends of the curtain guard fold back to bring the transport width down to 3.00 m. A hydraulic fold mechanism is an option.
The sloping deck and the stretched curtains prevent ingress of debris and the cutterbar stays clean.
The PUSH headstock on the push-type EasyCut F320/360 M and F 320 front mowers is compact by design and offers a reduced weight and length reducing the weight on the front linkage.
- For standard-fit hydraulic suspension
- Convenient ground pressure adjustment from the cab
- Perfect contouring from generous up- and rearward travel
- Front guards open wide for convenient servicing
KRONE front mowers with PULL headstocks are the perfect machines to cut extremely undulating terrain. Whether cutting flat or hilly land, they stand out for their enormous agility and generous up- and rearward travel.
The EasyCut F 320 PUSH and PULL models have two massive and powered top hats that produce a uniform swath for the tractor to straddle it. By comparison, the F 320 M / F 360 M PUSH and PULL spread the material across the full work width for more uniform wilting and reduced machine weight.
The front curtain opens up wide for convenient servicing and blade replacement. An integral drawer stores the spare blades right on the machine.
The sloping deck collects less material and the curtains stay cleaner. Canvas curtains won’t rust, save weight, protect the cutterbar and enhance the mower’s ability to follow the ground contours.
The current ground pressure is shown on the pressure gauge and can be altered hydraulically from the tractor seat for on-the-move adjustment to varying conditions. A lockable tap allows operators to carry out up/down and lock/release functions.
The mower is suspended in its centre of gravity, a design that increases the machine’s up/down travel by up to 18° and guarantees the sward is not damaged in undulating terrain. When hitting an object, the mower breaks back and to the rear without altering its cutting height.
The pulled EasyCut F 320/360 M and F 320 front mowers attach quickly and easily and without A-frame to the tractor linkage. A single-acting ram that is integrated in the headstock and lifts the mower clear of the ground for smooth headstock turns.
- Ideally suited for compact tractors in mountain regions
- Lightweight machines reduce the load on the front axle
- Compact design for good handling
- Centre-of-gravity mounting and pivot support
The front mounted 2.73 m EasyCut F 280 M, the 3.16 m F 320 M, and the 3.60 m F 360 M mowers from KRONE are the ideal mowers for mountain fields, boasting a compact design, a centre of gravity close to the tractor, a perfect cut on steep slopes and good attachment options for light-weight and compact mountain tractors.
The front mowers EasyCut F 280 M, F 320 M and F 360 M are not suspended in their mid-point but in their centre of gravity – a design that distributes the pressure uniformly across the entire work width and leads to cleanest cuts.
30 cm vertical travel on either end of the machine allows EasyCut F 280, F 320 M and F 360 M to give clean cuts in undulating terrain while protecting the sward.
Adjusting the ground pressure is easy by setting pins and adjusting the chains that alter the spring tension. A telescoping top link is an option for even better contouring in undulating terrain.
Following every contour, the pushing suspension design provides generous vertical travel and combines with long skids and a telescoping top link to provide optimum ground hugging in any direction. The extremely small gap between the tractor wheels and the mower reduces the pivoting range, increases drive shaft longevity and enhances visibility.
- Robust headstock and vertical travel
- Plenty of clear space for an unobstructed crop flow
- Pto-shaft driveline for frictional connections
- No spools required
- Two optional swathing drums for work on slopes
Light in weight (500 kg +), the EasyCut M front mowers perform effectively in any type of terrain. No spools required. Attachment and removal is quick and easy. The cutterbar is suspended right behind the outer hats – an ideal design that ensures a uniform crop flow.
The guard ends on EasyCut F 280 M and F 320 M front fold back to bring the transport width down to 3.00 m. They can also fold hydraulically as an option. EasyCut 360 M has transport width of 3.45 m.
Two optional swathing drums of medium height help ensure a uniform crop flow when working on steep slopes and even across the slope.
The discs and top hats spinning towards the middle (A sense of rotation) feed the crop in a consistent flow to the middle forming a central swath which offers the best setting for further processing.
Drive power flows through a frictional driveline of pto shafts and gears, a system that warrants an efficient transfer of power from the tractor down to the cutterbar discs – even in difficult conditions.
- Powered top hats present the swath between the tractor wheels
- Uniform swath presentation
- Continuous crop flow
The KRONE EasyCut F 280 and F 320 and stand out for their massive top hats which mount behind the discs on either end of the cutterbar. Driven from within the cutterbar, they provide a consistent flow of crop to the centre of the machine so that the tractor wheels will not run on the fluffy swath and the harvester will pick up the material without losses.
EasyCut F 320 has high and low top hats distributing the material across the work width – forming an ideal combination with rear mowers that spread the material across the work width.
The EasyCut F 320 with low top hats can have the existing hats topped by extensions. The bolted extensions reduce the swath by approx. 40 cm so narrow tractors can straddle it.
The drive power flows down a power belt that is tensioned automatically and enters the mower through a right-angle gearbox and the top hat. The overrunning clutch is integrated in the drive shaft as a standard.
The use of massive spur gears in the main gearbox translates into smooth running and great efficiency. The smaller auxiliary spur gears drive only one disc each. The gears that drive the top hats are powered by the spur gears in the main gearbox.
All discs on EasyCut F 280 and F 320 spin inwards, feeding the material to the middle and forming the swath. The powered top hats feed the crop flow to the rear for a perfect swath – even on slopes.
- A compact combination
- Generous pivoting range
- Optional telescopic top link
- No hydraulic connections
- Ideal when combined with EasyCut B mower
The front mounted KRONE mowers stand out for easy handling, a straightforward design and superior functionality. The pushed version is compact in size and low in weight. Suspended by a pivoting support in its centre of gravity and close to the tractor's front wheels, the unit benefits from very little travel for perfect cuts, uncontaminated forage and fast regrowth.
Lights and warning panels are an option on EasyCut F 280 and F 320. The two front mowers are supplied with standardized brackets that are suitable third-party lights as well.
The guard ends on the KRONE EasyCut F 280 and EasyCut F 320 front-mounted disc mowers fold back to bring the machine’s transport width down to 3.00 m. The hydraulic guard ends are options and require a double acting spool.
Cutting at a uniform ground pressure across the full work width, the EasyCut F 280 and EasyCut F 320 mowers suffer less wear, operate smoothly and leave perfect cuts.
The front and side curtains have rubber bumper strips that protect them from damage and retain the value of the mower.
Integral coil springs suspend the mower horizontally when lifted out of work. The hydraulic damper absorbs lateral vibrations and enhances operator comfort.
Pivoting through a large 40 cm range, these disc mowers follow any ground contour, produce clean forage and leave a healthy sward.
The large contact area gives best contouring and height control even in difficult terrain. The low ground pressure makes floating even easier to avoid any scuffing.
The flexible and telescoping top link (option) allows the mower to follow any contour and maintain a uniform cutting height.
A perfect system: EasyCut F 280 and F 320 are mowers that adapt to any type of ground contours – in and across the direction of travel. The pushed design allows for plenty of up and down travel – the ideal design for rough terrain. In addition, the compact build offers an excellent overview in the field and an excellent transport stability for safe travel on public roads. As it mounts close to the tractor, the linkage travels through a smaller angle and less strain is put on the driveshaft.
The ground pressure is controlled by refitting the chains and the pins that hold the coil springs in place. After all, an optimum ground pressure is fundamental for consistent cuts and high work rates. Chains on the inside of the coils protect these from overexpanding.
- Conditionneuse à dents CV – pour des temps courts de séchage dans le champ
- Commande facile et rapide
- Déflecteurs en option pour une dépose large
- Largeur d’andain réglable en continu
- Boîte de vitesses: Degré de conditionnement réglable
Le conditionneur à dents CV KRONE et ses dents en acier en forme de V, traitent le fourrage de façon intense sur toute la largeur du lamier. Le diamètre important de 64 cm et la disposition hélicoïdale des dents assurent un flux continu du fourrage, une capacité d’absorption élevée et un conditionnement optimal.
This lever in the multi-step gate varies the gap between the tines and the baffle plate. As you reduce the gap you increase the intensity of conditioning.
The CV conditioner has ‘two-in-one’ pulleys that offer two speeds. Using the quick-change blade tool, you can easily slacken and replace the belt.
The machine offers both. Set the swathing width by adjusting the swath boards. Optional deflector plates ensure a consistent and uniform distribution of the crop across the full work width.
The v-tines are made from hardened steel and mount at a steep angle, treating the forage intensively and powerfully. The tines pivot to the rear when hitting a foreign object whereas forward pivoting is restricted to increase the service life of the pins.
The CR roller conditioner models (polyurethane rollers or M-Rolls)
- Consistent crop flow by 25 cm diameter rollers
- High throughput from powered crop processor rollers
- Top quality from profiled rollers – thanks to their meshing effect
- Choice of roller conditioners – polyurethane rollers or steel M-Rolls
Leafy crops like Lucerne or clovers require a different type of conditioning than crops that are predominantly grass. The CR roller conditioners give particularly gentle treatment, leaving intact the delicate leaves which are so rich in protein and safeguarding the value of the feed. Spreading the crop will speed up wilting.
The counter-rotating M-Rolls mesh to crush the material and yet leave a sufficiently wide gap for the material to pass through. The result is a uniform conditioning quality for uniform wilting and no fragmentation – the perfect system for lucerne, for example.
The top roll of the M-Rolls is driven by a separate gearbox on the right end of the cutterbar which synchronizes the speed of the top and bottom rolls, bracing you for wet and heavy crops.
The large-diameter CR conditioner rotors deliver a smooth and consistent flow of crop and have a low power input.
The full-width polyurethane rollers ensure a uniform conditioning effect across the entire work width and the polyurethane coating ensures maximum longevity. The interlocking surfaces of the rollers give intensive but gentle conditioning whilst avoiding losses.
The conditioning rollers are driven by gearboxes. The box that drives the bottom roller is integrated in the gearbox that powers the cutterbar. The top roller suspends from a spring which ensures a continuous flow in inconsistent growth and allows foreign objects to pass the system trouble-free. Thanks to a stepless adjustment system, the operator adapts the gap and pressure steplessly to current yields.
- Working width: 3.16 m
- With PUSH-type or PULL-type cutterbar
- Intensive conditioning: Choose between aggressive steel tines or chevron-profiled squeeze rollers
The front mounted mowers F 320 CV with tine conditioner and F 320 CR with roller conditioner are specialists that warrant high-quality forage. Featuring either a large 64 cm diameter tined rotor or two 25 cm squeeze rollers, these mowers are the pros that deliver high-quality forage and best conditioning even in high-yielding crops.
Each end of the guard can be folded back to bring transport width down to 3 m. This can also be done hydraulically from the tractor as an option.
The pulled headstock has a hydraulic cylinder that raises the mower extra high, providing plenty of ground clearance in any type of terrain. This means there is plenty of clearance for butterfly combinations to handle high-volume swaths on the headland.
The pulled headstock design allows the machine to break back and up through a larger angle, hence making it more suitable for operation in rolling land.
A CCTV camera system is an option for all models that are coupled without A-frame. The system is DLG certified and offers two views on the same screen for improved visibility in awkward situations. For example, narrow field gates are now easily managed without a helper. The package comprises two cameras, the display screen and the necessary wiring.
With no A-frame required, there is plenty of space around the headstock. The pushed design makes for a very compact machine, reduces weight and is gentler on the turf. The transverse pivoting action is provided by the tractor’s link arms. The pulled version has the suspension springs integrated in the machine’s suspension system. The tension of the two springs is controlled from one single crank.
- 3.60 m work width, 3.45 m transport width
- Choose between aggressive steel tines or chevron-profiled rollers for intensive treatment
- Pushed or pulled design
The KRONE EasyCut F 360 CV and CR front mowers can have a pushed or pulled cutterbar. Working at a width of 3.60 m, the machine suits wide tractors with oversize tyres. More generous overlaps within the combination result in clean cuts on slopes and in curves and make for larger work widths in general.
Powerful tractors and massive equipment call for strong and sturdy coupling hardware. This heavy-duty three-point headstock withstands high machine weights and strains and offers fast and easy attachment/ removal.
Adjustable springs optimize the ground pressure and allow the machine to float. A telescoping top link is available to deliver perfect cuts in undulating terrain.
The floating EasyCut F 360 CV and F 360 CR in pulled configuration are compact and slim machines that provide excellent visibility. These machines impress by a low dead weight and cleanest cuts.
The pushed model has an integral hydraulic ram that provides plenty of ground clearance when the machine is being lifted out on the headland or when working in rough terrain. You can increase the lift by raising the tractor’s link arms to master even the most difficult situations.
The pull-type configuration gives the machine more than 30 cm transverse travel for cleanest cuts also in undulating fields.
The KRONE EasyCut F 360 CV and CR front mowers can have a pull-type suspension. This allows the mower to break back and up for added protection from foreign objects.
Adjustable springs optimize the ground pressure and make for perfect cuts. The suspension springs are integrated in the linkage, a design that eliminates the need for attaching and removing them when attaching/removing the machine.
- The first foldable cutterbar on the market
- 4.04 m working width and yet less than 3 m transport width
- Maximum overlap and high efficiency
- Hydraulic relief is as a standard feature
- EasyCut F 400 Fold with merger auger as standard equipment
- EasyCut F 400 CV Fold with tine conditioner
This first foldable cutterbar on the market is awarded the DLG Silver Medal at Agritechnica 2019. The KRONE development translates into maximum efficiency, maximum overlaps and maximum road safety. Directly from the tractor cabin, the operator activates a hydraulic slewing gear and swings the ends in front of the cutterbar. The EasyCut F 400 Fold is available either with V-shaped steel tines as tine conditioner, or with merger auger.
[Translate to EN (US):] Die Schwadschnecke des EasyCut F 400 Fold Mähwerk von KRONE bietet zahlreiche Vorteile für die Grünfutterernte. Variable Schwadbreite, maximale Futterqualität und streifenfreies Mähen, dank höchstem Überschnitt. Die Kombination mit anderen Mähwerken wie den EasyCut B oder EasyCut R Modellen ermöglicht maximalen Überschnitt bei Kurvenfahrten und in Hanglagen.
[Translate to EN:] KRONE setzt mit dem innovativen EasyCut F 400 Fold mit Schwadschnecke neue Maßstäbe in der Grünfutterernte. Das Mähwerk ermöglicht eine effiziente Futterbergung durch die gleichmäßige Ablage des Ernteguts in einem Schwad. Mit einer Arbeitsbreite von über vier Metern ist maximale Schlagkraft garantiert, während der patentierte Klappmähholm eine Transportbreite von drei Metern ermöglicht. So kann problemlos manövriert werden, etwa bei engen Stalleinfahrten oder beim Entladen auf schmalen Futtertischen.
[Translate to EN:] Der EasyCut F 400 CV Fold Aufbereiter ist mit V-Stahlzinken ausgestattet, welche eine robuste Konstruktion sowie eine hohe Haltbarkeit bieten. Die widerstandsfähigen Stahlzinken können Fremdkörpern ausweichen und Verschleiß vorbeugen.
The standard swathing plates swath the material to any width and infinitely variably. The plates are stored on the machine when not needed.
Best adaptation to the ground: The hydraulic mower suspension and the new headstock provide more than 1 m up/down travel and perfect contouring.
The EasyCut F 400 CV Fold comes into its own when combined with the KRONE Butterfly mowers, producing stripe-free cuts in challenging or sloping fields.
Stepless conditioner control: The conditioner speed is set either by refitting a pin or steplessly by operating a crank. This adjusts the baffle plate depending on crop requirements.
The conditioner speed is set either by refitting a pin or steplessly by operating a crank. This adjusts the baffle plate depending on crop requirements.
Maximum operator comfort: The EasyCut F 400 CV Fold has hydraulic end guards as standard so operators can fold them up/down from the seat. Folding the guards or the cutterbars into position requires only one double acting spool.
The EasyCut F 400 CV Fold has hydraulic end guards as standard so operators can fold them up/down from the seat. Folding the guards or the cutterbars into position requires only one double acting spool.
To prepare the machine for road travel, the two swathing drums on either side swing behind the tractor wheels. This does not cut the driveline and the discs remain in cutting position. The slewing gearbox which provides the connection is powered and secured hydraulically – all done automatically from the cab. The design translates into a less than 3 m transport width.
Coupling directly to the lower links of the tractor, the new KRONE headstock does without an A-frame. The hydraulic suspension is integrated in the lifting mechanism so that only one single-acting and one double-acting spool are required. The end guards and the foldable swathing drums are sequence controlled from the convenience of the cab.
- Rigid cutterbar
- Perfect swathing between the tractor tyres
- Optional: hydraulically folding side guards
- Equipped with CR conditioner rollers as a standard | KRONE M-Rolls as an option
- Maximum acreage output
- Maximum efficiency when combined with other KRONE EasyCut mowers
The KRONE EasyCut F 400 CR mower with CR- or M-Roll conditioner rollers ensure perfect conditioning of the crops. Choose the hydraulically foldable guards on the sides (available as an option) for even more convenience.
[Translate to EN:] Das EasyCut F 400 CR Mähwerk bietet eine großzügige Arbeitsbreite von 4 Metern. Um die volle Breite effektiv zu nutzen, kann es beispielsweise in Kombination mit dem EasyCut B 1000 CR verwendet werden, wodurch ein Überschnitt von 57 cm pro Seite erzielt wird. Dies gewährleistet ein streifenfreies Mähergebnis unter allen Bedingungen. Mit einer Transportbreite von nur 3 Metern ist das Mähwerk äußerst wendig und erleichtert das Fahren und Manövrieren auf engen Straßen und im Hofbereich.
[Translate to EN:] Die optional erhältlichen hydraulisch klappbaren Seitenschutze können bequem von der Kabine aus gesteuert werden.
[Translate to EN:] Das KRONE Frontmähwerk EasyCut F 400 CR ist mit einem starren Mähholm ausgestattet und verfügt serienmäßig über CR Aufbereiterwalzen. Die Verzahnung der Walzen bewirkt eine intensive, jedoch schonende Aufbereitung des Erntegutes ohne Blattverluste. Das EasyCut F 400 CR eignet sich insbesondere für großflächige Betriebe mit Luzerne, wie beispielsweise in den USA oder Australien. Das EasyCut F 400 CR kann wahlweise mit CR- oder M-Roll-Aufbereiterwalzen ausgestattet werden, um das Mähgut unter allen Bedingungen optimal aufzubereiten.
Dairy farmers are looking into the potential of fresh grass for increasing milk yields from the basic ration. In view of rising silage storage costs, hay milk production programmes and further aspects fresh mass is being viewed from a different angle today. This new approach is supported by KRONE who offers the ideal machines that help you cut and feed highly valuable fodder every day. Combining the EasyCut F 400 CV Fold mower with the MX 330 GD forage wagon makes a powerful punch.
[Translate to EN:] Durch den klappbaren Mähholm des KRONE EasyCut F 400 Fold wird das Arbeiten an engen und unübersichtlichen Stellen erleichtert – eine Transportbreite von unter 3 m sorgt für ein perfektes Handling, insbesondere auf schmalen Futtertischen.
[Translate to EN:] Unmittelbar nachdem die Schwade abgelegt worden sind, werden sie vom Ladewagen sauber und gleichmäßig aufgenommen und anschließend mit dem ab Werk verfügbaren Querförderband verlustfrei auf dem Futtertisch abgelegt.
[Translate to EN:] Durch die Schwadschnecke wird das Mähgut in einem kompakten und gleichmäßig geformten Schwad abgelegt. So wird nicht nur eine effiziente und schnelle Futterernte ermöglicht, sondern auch eine höhere Futterqualität erzielt.
[Translate to EN:] Die perfekte Kombination aus dem Hause KRONE: Das EasyCut F 400 Fold Frontmähwerk mit Schwadschnecke und der RX Ladewagen mit 40 m3 Ladevolumen bilden den KRONE Frischmasse-Express, welcher für maximale Schlagkraft sowie eine unübertroffene Futterqualität steht.
The combination goes into narrow buildings and feed passages thanks to the patented slewing gearbox which allows the wide mower to be folded into a narrow unit.
The cross belt discharges the feed on to small and large any feed passages in no time. Mounted cleverly at the tailgate, the discharge belt enables owners to use the MX for feeding fresh grass directly to the cows.
- Autonomous telemetry unit thanks to solar panel and rechargeable battery
- Automatic data acquisition in real time
- Data transmission to KRONE Smart Telematics and agrirouter
- Can be used flexibly on all machines (regardless of the manufacturer)
- Especially for machines without own electronics as well as rental machines
The KRONE SmartConnect Solar telemetry unit is completely autonomous thanks to the solar panel and rechargeable battery. This means that the box can be used flexibly on all machines, regardless of the manufacturer. The following data is sent by the SmartConnect Solar in real time: the position, the speed, active and inactive operating hours, the distance travelled, the working and transport position, the number of loads or the worked area and the charge status of the rechargeable battery. The machine data is recorded in real time and automatically transmitted to KRONE SmartTelematics or the agrirouter.
The position sensor can detect the working position (active) and transport position (inactive) by the alignment of the SmartConnect Solar. With a stored working width, the SmartConnect Solar can also be used as a hectare counter. Alternatively, it is possible to record the loads on transport vehicles by opening/closing the tailgate.
As the KRONE SmartConnect Solar has an autonomous power supply and can be mounted regardless of the manufacturer, it is ideal for use on rental machines. In this way, you always know where your rented machine is. The precisely documented working hours and acreage output enable transparent and accurate invoicing of the rental machines.
[Translate to EN:] Mit dieser autarken Telemetrieeinheit können auch einfache Maschinen wie Mähwerke, Wender, Schwader sowie andere Geräte ohne eigene Elektronik in ein digitales Datenmanagement eingebunden werden.
Models
EasyCut F 280 | EasyCut F 280 M | EasyCut F 320 (2. Gen) | EasyCut F 320 (3. Gen) | EasyCut F 320 M (2. Gen) | EasyCut F 320 M (3. Gen) | EasyCut F 320 CV | EasyCut F 320 CR | EasyCut F 360 M | EasyCut F 360 M | EasyCut F 360 CV | EasyCut F 360 CR | EasyCut F 400 CV Fold | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Working width (m) | 2.71 | 2.73 | 3.14 | 3.14 | 3.16 | 3.16 | 3.16 | 3.16 | 3.60 | 3.60 | 3.60 | 3.60 | 4.04 | configure |
PUSH-type cutterbar (Push) | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | configure |
PULL-type cutterbar (Pull) | - | - | - | optional | - | optional | optional | optional | - | optional | optional | optional | Standard | configure |
No. of discs | 4 | 4 / 2 optional | 5 | 5 | 5 / 2 optional | 5 | 5 | 5 | 6 / 4 optional | 6 | 6 | 6 | 5 | configure |
No. of top hats | 2 | 2 / 4 optional | 2 | 2 | 2 / 4 optional | 2 | 2 | 2 | 2 / 4 optional | 2 | 2 | 2 | 4 | configure |
Tine conditioner CV | - | - | - | - | - | - | Standard | - | - | - | Standard | - | Standard | configure |
CR conditioner with rubber rollers | - | - | - | - | - | - | - | Standard | - | - | - | Standard | - | configure |
Input power (kW/hp) | 44 / 60 | 40 / 55 | 51 / 70 | 51 / 70 | 48 / 65 | 48 / 65 | 59 / 80 | 59 / 80 | 54 / 75 | 51 / 70 | 66 / 90 | 90 / 90 | 74 / 100 | configure |
configure | configure | configure | configure | configure | configure | configure | configure | configure | configure | configure | configure | configure |